Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

hi ... recently I hit myself of this relay box, I changed the whole wiring loom under the dash from a vectra and put another that contains it this relay box (the old one was empty). The car (C20NE was the engine) from which I took the wiring loom was full (Ac / heated seats / power windows). My prob...

Hello again...Gaz I have one question: what model of ABS do you have on car? because I talked to an electrician and he said it depending on what model of abs i have. I have the first model because the car is from 1990, and to work must be the model with 26 teeth. Thanck you.

I moved the ground....still nothing. Is there any way to check if the relay is ok? To reverse 31 with 15?
Must necessarily fuse on + or it will go without?...now is wired somewhere on contact without fuse.

Another problem at my car: a few days appeared ,,F" in the corner of the time. I do ,,paperclip test" and appears F167. I reset the computer and appears again after a few minutes. This is one.
Two: it show me at instant consumption more less....in full boost 16l/100KM?
Why?
Thank you.

I just came from car and still don't work :twisted: . I put PIN15 on ignition, PIN31 on ground (to a bolt on car), PIN-IN1 at one wire on ABS cable (ABS from the left wheel) and PIN-IN2 at the other cable (same ABS sensor from the left wheel) and PIN-OUT at the blue/red cable from de clock (is only ...

Hello again. One question: does matter at IN1 and IN2 how is related with ABS wire?

Toora 16"

I understand....thank you very much.

If the clock is set for F28, they can be set for F20? In case if don't indicate correctly?
I will try this tomorow and i will return whit dates.

But i will not have consumer if i put directly on battery? And what fuse? You where did connected?

I investigated and it don't have power. Where exactly i need to put de pin 15....directly on battery?
At you after it did not work what you did?

Hello Gaz....i put the reley and stiil don't work. Any sugestion?

Black smoke is usually caused by a fuel supply error (too much fuel in most cases).

Thank you very much Gaz. You've been very helpful. I'll be back after i will do the work. Now should be easy.

Ops...i don't have that box anymore on my C20LET. Where is that box to you, to me is a single relay. Corsa C relay ,to understand, that is powered with 2 wires... coming from where? From my ABS whire (earth and live)? And from that relay one wire goes to clocks? This relay have only 3 pins? I found ...

Ok....but this relay form corsa c....where exactly should be installed? If you could explain that to me, for beginners, would be perfect . Thanks.

Thank you for reply Gaz...I could use ABS relay from my vectra (i have ABS)? But which pin on the back of the clock is for speed signal?

Hello...i'm from Romania and I have a Vectra A with C20LET. First it was a C20XE and then it became C20LET. Original watches were those C20XE with F20 gearbox on cable; i kept the F20 but I have mounted watches C20LET with 260km/h or 160miles (electronic watches); I took the ECU tachometer signal (a...