Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

planetc wrote:If you are using good quality oil and changing it often enough it shouldn't need anything added to it.

+1

If it's leaking air you needs the tyre off otherwise its pointless

will be a bog standard pattern part, nowt special but should still work.

check the length of it compared to the one you removed

stupid idea the thermostat, we dont live in the desert its Britain

I wouldnt be paying a lot as they dont do much.

93 should be cav/vectra based so probably, chip pan dan should be able to have an idea

Its the plastic pin in the middle needs the centre pulling out and unclipping the pegs on the edges

yea but might be worth pulling it fully out you dont want it going in pissed.

just replace for new, people replace knackered old bushes for poly and think they are the greatest, new is fine and a hell of a lot cheaper.

just replace your whole wishbones and arb bushes and odds on it will be 100% better.

Cant see it being anything else. planetc will probably correct me

Yea they dont do a lot tbh, i did see a small improvement but id have been pissed if it had been the £300 eds wanted

http://www.eds-motorsport.de/shop/de/Op ... steigerung

ecu, mine has eds chips and it has the 8k limit.

porsche wheels are 5x130

Larger brake caliper pistons, so spongier pedal

yes. watch out with your hubs some are too large to fit over the 288m disk

It would steer like shit, Your not taking any of the steering angle into consideration its not a fixed point it moves dynamically. http://www.autek.dk/Articles/PrincipOfS ... eo_eng.pdf Do some reading its not as simple as just swapping bits about and hoping for the best. its not a childs wooden go ...

problem is the steering rack is on the frame not on the firewall so trying to use vectra/mk4 astra means a rack issue

wont get them on

http://www.speedhunters.com/2013/08/car ... d-calibra/

linkage or linkage mount?

Gsi don't have beams so it's probably an sri one. All beam flexis are the same

Gsi dont have an imobizer

No icv should stall about a second after you take your foot off the throttle

Plenty of talk of not running standard shocks its not ideal but they will still be fine, it tends to wear them out more than they run out of travel.

Even if the springs are solid it should still move, if it doesn't it does sound like its bent.

If you bounce that corner what happens, it carries on bouncing, or bounces once then stops?