Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

Hi there, I am planning on buying a Lexmaul exhaust manifold designed for a Vectra A which is sold in Germany. I am wondering if anyone has bought or fitted these to a Cavalier before ? - Mine is a SRI 2.0 16v Ecotec Below is the website and information Many thanks Colin https://www.lexmaul-shop.de/...

Ok, I will have a look at these
many thanks

Hi there, I have a Vauxhall Cavalier 2.0 16V SRI ECOTEC, and I am wondering what is the best rear shock absorber for the car. I have lowered it on Cobra springs by 30 mm and just want it stiffer on the back.

Many thanks Colin

Hi there thinking of changing my manifold to a 4-2-1 I have been looking at Lexmaul. Does look a nice job but they are after £490, does anybody know of another make that i could look into to try and get something cheaper. I have got a Vauxhall Cavalier 2.0 16V SRI ECOTEC any help would be much appre...

Hi there cambelt, water pump, oil, filter, wishbones, eventually sorting out crankshaft sensor and the rest was cosmetic and finding the time and the money
Cheers colin

Really nice to be able to get it back on the road and be able to drive it still got a few things to do but i do not think that will ever end.. but got all the most important stuff done thanks for everyone's help for the duration of time since i joined this forum :wave Many thanks Colin https://www.d...

Many thanks I purchased the sensor and got it today and says Siemens on so many thanks !

Hi there does anybody know of a website where i can get a Genuine Siemens Crankshaft Sensor 90458251 i can find some hella ones would anybody recommend these any help much appreciated Colin

hi there nearly ready to fit my GSI bumper on my SRI could someone give me a guide on the easiest way to remove my bumper as i would like to give it a go myself so if i could have it in layman's terms i would really appreciate anybody's help

many thanks colin

hi there car is nearly ready to go back on the road, but its not gunna be my daily drive so im looking at insuring though classic car can anybody recommend any insurance company to looks at ?

many thanks colin

ilovedmymantas wrote:I'm very impressed, they look brand new.
What are the costs ?

matt

£8.50 and had to pay to post them away and to get back

I contacted them through eBay if they could scan my badge and copy the letters.

Hi there browsing on eBay and found them the seller is on the paper on the pictures

hi there can somebody just confirm that if i wanted to replace my front SRI bumper with a GSI one, that it is a straight forward swap

many thanks colin

hi there just got my badges back they have done a great job, look brand new so i think i will be putting them back on

Speaking of badges, does anyone know a good way to re-silver them? Hi there that's what I'm in the process of trying, sending my badges off they will scan badges and then get the letters cut out in chrome and then hopefully with a steady hand stick them on I'll put a picture on when they are finish...

hi there the whole reason this started was both cavalier and vauxhall badge had both lost their chrome lettering so found someone that will scan the badges and print off the letters in chrome which i hope to attach back on the badges with a careful hand so when i put the 2 badges off got curious to ...

I know what you mean by looking cluttered, but like you said it's personal taste I'll have to try and make my mind up

Thanks for replies

hi all would appreciate your experts opinion as i cant make my mind up rear badges or no badges? opinions appreciated

many thanks colin

Hi there when I flash the main beam the side lights do stay on its only when I put the fall beam on permently that they go off

Hi there as you can tell I'm not very good at electrics so the single grey wire in the left hand side chop that connector off and add that to the white wire off the main beam and on the right hand side do the same again but what do I do with the red connector ??

Many thanks colin

Hi there thanks for your reply and your time i was hoping that the new wire loom would keep sidelights on when you put full beam on but if all it does is give me daytime running lights think i will leave it as it is

many thanks colin

https://www.dropbox.com/s/ak8y3nh58qqutqn/DSC_0009.JPG?raw=1 https://www.dropbox.com/s/ad1v7wi2ld4q2r6/DSC_0010.JPG?raw=1 https://www.dropbox.com/s/2ttc3bp825ge7dg/DSC_0011.JPG?raw=1 https://www.dropbox.com/s/ysqvoxs4vlkkt09/DSC_0012.JPG?raw=1 https://www.dropbox.com/s/x895xpkhtvhzy4q/DSC_0013.JPG?...

Many thanks for replying I will have a look tomorrow in the day

Any pics of the back of the lights ? Do you know what the red cable with the ring terminal is & the black cable Hi there the red and black wires are part of the new wiring that i got when i bought the lights there is also a relay and fuse box connected, i have got the lights to work only proble...