Body wiring looms
Moderator: Robsey
Body wiring looms
Hi all I have been looking at my wiring loom on my project and well its a bit of a mess with bits cut out, other sections missing from under bonnet with broken connectors.
So my question is when its time to look for new one are the wiring looms generic like my Astra OPC or do I have to get a specific Gsi 4x4 loom???
The engine harness does not concern me as I will be running aftermarket ecu and loom eventually, as I want best results for crap fuel we have here in Ireland.
Cheers
So my question is when its time to look for new one are the wiring looms generic like my Astra OPC or do I have to get a specific Gsi 4x4 loom???
The engine harness does not concern me as I will be running aftermarket ecu and loom eventually, as I want best results for crap fuel we have here in Ireland.
Cheers
DRIVE A Toyota!!!!!! - that's social suicide!!!!
Re: Body wiring looms
There are a couple of different looms dependent upon model year and model specification.
There are minor changes at model years 1989, 1991 and then facelift 1992 onwards.
Trim levels have different options so LS / L or lower will usually not have wiring for front fogs, head lamp wipers etc...
If you want all the options you are probably looking at Diplomat or CDX specification looms.
There are minor changes at model years 1989, 1991 and then facelift 1992 onwards.
Trim levels have different options so LS / L or lower will usually not have wiring for front fogs, head lamp wipers etc...
If you want all the options you are probably looking at Diplomat or CDX specification looms.
Re: Body wiring looms
Sound, thanks for reply. I have found a rhd loom brand new online just need to find out what model it caters for as parts number is not recognised on ecat
DRIVE A Toyota!!!!!! - that's social suicide!!!!
Re: Body wiring looms
What part number is it -
Maybe EPC will recognise it.
Either that or do a google search.
I usually put "vauxhall" or "opel" followed by the part number.
Maybe EPC will recognise it.
Either that or do a google search.
I usually put "vauxhall" or "opel" followed by the part number.
Re: Body wiring looms
Part numbers are
Opel Mfr .: 1296290
GM Mfr .: 90463163
Emailed them and just got a blunt as described answer, cheeky buggers had no description till I asked for one lol
They its c25xe loom which is no help other than I don't remember them coming in cdx/diplomat, so maybe no good.
Link
http://www.opel-classicparts.de/kabelsatz-73687.html
Opel Mfr .: 1296290
GM Mfr .: 90463163
Emailed them and just got a blunt as described answer, cheeky buggers had no description till I asked for one lol
They its c25xe loom which is no help other than I don't remember them coming in cdx/diplomat, so maybe no good.
Link
http://www.opel-classicparts.de/kabelsatz-73687.html
DRIVE A Toyota!!!!!! - that's social suicide!!!!
Re: Body wiring looms
Did do google originally best info I got was from OEM something page which told me rhd gt identity but nothing about diplomat/cdx etc the bit I want to know hahaha
DRIVE A Toyota!!!!!! - that's social suicide!!!!
Re: Body wiring looms
I presume that if it is a V6 loom, then it is probably a GSi.
I shall have a look at EPC as soon as I get chance.
I shall have a look at EPC as soon as I get chance.
Re: Body wiring looms
Cheers robsey be mighty to have new loom in car
DRIVE A Toyota!!!!!! - that's social suicide!!!!
Re: Body wiring looms
Here is the information provided by EPC.
Instrument panel wiring harness -
Numbered 90 463 163.
As reported by the seller, it is indeed for a Cavalier fitted with the C25XE engine.
Ident is GT.
For vehicles fitted with air bag.
But NOT fitted with air conditioning.
Also not for vehicles sold in Japan.
For right hand drive.
Chassis numbers: -
P1210036 to P1999999
P5247841 to P5999999
P7611691 to P7999999
As all chassis numbers start P, then this is intended for a 1993 Vehicle (facelift).
So would match in with any 1992 to 1995 Instrument panel.
So it is not for a GSi as these were pre-facelift.
But I would assume electronic speedo.
According to TIS - The C25XE was only produced with an automatic transmission.
Instrument panel wiring harness -
Numbered 90 463 163.
As reported by the seller, it is indeed for a Cavalier fitted with the C25XE engine.
Ident is GT.
For vehicles fitted with air bag.
But NOT fitted with air conditioning.
Also not for vehicles sold in Japan.
For right hand drive.
Chassis numbers: -
P1210036 to P1999999
P5247841 to P5999999
P7611691 to P7999999
As all chassis numbers start P, then this is intended for a 1993 Vehicle (facelift).
So would match in with any 1992 to 1995 Instrument panel.
So it is not for a GSi as these were pre-facelift.
But I would assume electronic speedo.
According to TIS - The C25XE was only produced with an automatic transmission.
Re: Body wiring looms
That's great info cheers, post my car by looks of it. Got a line on a full loom so and maybe stick with that as it GSi to.
Cheers for time robsey.
C25XE auto? lol I had a n reg manual nearly 10 years ago
Cheers for time robsey.
C25XE auto? lol I had a n reg manual nearly 10 years ago
DRIVE A Toyota!!!!!! - that's social suicide!!!!