Please could someone tell me which wire is live and neutral on the aerial?
I wish to test the electric aerial to see if it works without connecting it to the car bc im selling it.
Testing Aerial to see if it works
Moderator: Robsey
- planetc
- Registered user
- Posts: 6258
- Joined: Wed Oct 20, 2010 9:59 pm
- Location: Eating cake in Bexhill On Sea
- Contact:
Re: Testing Aerial to see if it works
depends on the exact unit, but as a general rule of thumb 3 wires black live, brown earth and blue the live trigger to raise it
"No the temperature gauge doesn't work........
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
Re: Testing Aerial to see if it works
If you have Vauxhall / Opel original colours,
Then you should have -
Red - Permanent Live.
Brown - Ground
Red with white or grey stripe - Radio controlled live "lift" supply.
Then you should have -
Red - Permanent Live.
Brown - Ground
Red with white or grey stripe - Radio controlled live "lift" supply.
Re: Testing Aerial to see if it works
I have black,blue and a green wire with an earth wire that attaches to the aerial for attaching to car body.The aerial is a genuine vauxhall aerial.
Re: Testing Aerial to see if it works
In that case -
I would suspect -
Black live.
Blue ignition live
Green for ground.
But I am open to being corrected.
I would suspect -
Black live.
Blue ignition live
Green for ground.
But I am open to being corrected.
Re: Testing Aerial to see if it works
Thanks for the help guys but i resorted to trying it on the car and it worked.
.
.
Re: Testing Aerial to see if it works
Is it still for sale?
Re: Testing Aerial to see if it works
Sorry,sold it.