Page 3 of 3

Re: Electric Windows Total Closure

Posted: Sat Mar 11, 2017 10:19 pm
by blowfelt
So you connect the live to the live on the car's loom for total closure to work?

Re: Electric Windows Total Closure

Posted: Sat Mar 11, 2017 10:42 pm
by Robsey
It does not say it in Dan's How 2, but I think we have covered everything else.
So worth a go.

I will admit that I am clutching at straws here.

Now that I have the rest of my central locking working, I will get a new CR2032 battery for my Vectra-B remote key.
And give it another go in a couple of days.

(I am a bit busy travelling for the next few days... )

Re: Electric Windows Total Closure

Posted: Sun Mar 12, 2017 2:08 am
by blowfelt
I will have another go 2moz.

Re: Electric Windows Total Closure

Posted: Sun Mar 12, 2017 7:51 pm
by blowfelt
Total closure still did not work when I connect a live feed from pin 18 to live feed on car's wiring loom.

Re: Electric Windows Total Closure

Posted: Sun Mar 12, 2017 9:44 pm
by Robsey
I have no idea at this point.

Maybe you need to get all four windows working properly from the centre console switches first.

Then when that is achieved, we can see if there is anything that we have overlooked.

In the meatime, I will look into getting mine to work. (Front windows only).
And report back in due course.

Re: Electric Windows Total Closure

Posted: Mon Mar 13, 2017 9:39 am
by blowfelt
I would have thought the front window (they total close with key) would have work on total closure bc I have never messed with these windows.