my gsi work to date
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... ml?filters[user]=138842521&filters[recent]=1&sort=1&o=16 that the cavy all undersealed black floor, white chassis,red crossmember ,the first thread at top of page is slide show if u cant see this thread
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... ml?filters[user]=138842521&filters[recent]=1&sort=1&o=0 subframe back on
Re: my gsi work to date
must be something wrong with the links mate, I can not access the pics, Adsbigsilver wrote:http://s921.photobucket.com/user/bigsil ... sort=1&o=0 subframe back on
Re: my gsi work to date
Not sure whats up mate, if u go to first thread on page 1 theres a slide show, dont understand how its not posting, posting onto first thread, sorry m8
Re: my gsi work to date
excellent work mate, looking really nice under there now, I can appreiciate all the work that has been done to the underside as I done my cav turbo the same, didn't need any welding as it is solid, but it was taken back to bare metal, rustproofed, undersealed, and running gear done silver, anyway mate a good job, keep it up and keep posting the pics, it will all be worth while when its all done mate, Ads
Re: my gsi work to date
Thanks very much m8, im gonny link everything back up on sunday, ive replaced nearly everything, no rust or soft metal anywhere now, the chassis is untouched except a small hole at front engine mount, just need to get the just for men noo lol, still needing few small parts that I burnt when welding, schoolboy lol
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... %20Uploads spax bilstiens amd brakes all linked up, looking for Brown plastic on driverside rear that seatbelt slots thorough brown in colour slso back seat, caught fire
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... sort=3&o=1 tank and exaust back on
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... ml?filters[user]=138842521&filters[recent]=1&sort=1&o=3 finally got her of the stands after a year and 3 months, all the work has been done underneath, absolutely splid and tight with no rust or signs of soft metal, she is on spax 60mm, just the rubbing down to do then full tespray
Re: my gsi work to date
Noticed hasnt posted again, click on first link shpuld take u in
- Envoy CDX
- Club Admin
- Posts: 9691
- Joined: Sun Sep 23, 2007 3:51 pm
- Location: Jarrow, Newcastle Upon Tyne
Re: my gsi work to date
Cracking pictures! and progress.
Were you wanting the pictures linked individually on here?
Were you wanting the pictures linked individually on here?
Re: my gsi work to date
Cant seem too see them now, has it been removed
Re: my gsi work to date
Wasnt to bothered, was getting problems loading, so I can show my progress, can u see them ok because I could at first now I cant, regards tam
- Envoy CDX
- Club Admin
- Posts: 9691
- Joined: Sun Sep 23, 2007 3:51 pm
- Location: Jarrow, Newcastle Upon Tyne
Re: my gsi work to date
I can see the links to your photobucket page - what is it you're trying to do?bigsilver wrote:Cant seem too see them now, has it been removed
Re: my gsi work to date
I thought ppl couldnt see the photobucket page so I post anothwr link, if its a problem to u just delete them
Re: my gsi work to date
that looks brilliant work mate, love the white underpan etc and the red running gear, i think thats thr only one ive seen that looks cleaner than mine underneath, Ads
Re: my gsi work to date
Thanks ad, ive spent a lot of time on her, hopefully get her on the april road round about march
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... sort=3&o=0
Re: my gsi work to date
Got my morettes at last, as above:-)
Re: my gsi work to date
http://s921.photobucket.com/user/bigsil ... ml?filters[user]=138842521&filters[recent]=1&sort=1&o=0
Re: my gsi work to date
Got opel2 adapter and connected to 89L, I can get live data ftom enginemanagent bit cant seem to get into abs when I click it, just saying no communication, turn key off for 20 srcs and turn back on, but still nante, as above post, any info a help
- planetc
- Registered user
- Posts: 6258
- Joined: Wed Oct 20, 2010 9:59 pm
- Location: Eating cake in Bexhill On Sea
- Contact:
Re: my gsi work to date
Year? Early abs is not obd compliant
"No the temperature gauge doesn't work........
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
we've driven 150 miles today........
the heater went cold last Thursday........
they check the level when it's serviced don't they?"
Re: my gsi work to date
This is the general listing for the ABS Modules.
To carry out a flash code diagnostic of the ABS system, short pins A and K on the diag plug and then turn on the ignition (engine not running).
If there are any stored fault codes, then the ABS Tell-tale light should flash out a two digit numerical sequence.
Early models which have the old ABS system where the control unit is located at the side of the passenger seat in a lump in the carpet do not usually have this fault code facility.
Check whether the diag plug has a wire at location K.
16 LH Front Solenoid ( Relay & Connections )
17 RH Front Solenoid ( Relay & Connections )
18 Rear Solenoids ( Relay & Connections )
19 Solenoids Relay Circuits
25 Faulty Sensor toothed Ring
35 Pump Relay Circuits
37 Stop Lamp Switch ( Pedal Switch )
39 LH Front Speed Sensor ( Air Gap & Operation )
41 LH Front Speed Sensor ( Resistance & Connections )
42 RH Front Speed Sensor ( Air Gap & Operation )
43 RH Front Speed Sensor ( Resistance & Connections )
44 LH Rear Speed Sensor ( Air Gap & Operation )
45 LH Rear Speed Sensor ( Resistance & Connections )
46 RH Rear Speed Sensor ( Air Gap & Operation )
47 RH Rear Speed Sensor ( Resistance & Connections )
48 System Voltage High/Low ( Alternator & Battery )
55 Faulty ECU
To carry out a flash code diagnostic of the ABS system, short pins A and K on the diag plug and then turn on the ignition (engine not running).
If there are any stored fault codes, then the ABS Tell-tale light should flash out a two digit numerical sequence.
Early models which have the old ABS system where the control unit is located at the side of the passenger seat in a lump in the carpet do not usually have this fault code facility.
Check whether the diag plug has a wire at location K.
16 LH Front Solenoid ( Relay & Connections )
17 RH Front Solenoid ( Relay & Connections )
18 Rear Solenoids ( Relay & Connections )
19 Solenoids Relay Circuits
25 Faulty Sensor toothed Ring
35 Pump Relay Circuits
37 Stop Lamp Switch ( Pedal Switch )
39 LH Front Speed Sensor ( Air Gap & Operation )
41 LH Front Speed Sensor ( Resistance & Connections )
42 RH Front Speed Sensor ( Air Gap & Operation )
43 RH Front Speed Sensor ( Resistance & Connections )
44 LH Rear Speed Sensor ( Air Gap & Operation )
45 LH Rear Speed Sensor ( Resistance & Connections )
46 RH Rear Speed Sensor ( Air Gap & Operation )
47 RH Rear Speed Sensor ( Resistance & Connections )
48 System Voltage High/Low ( Alternator & Battery )
55 Faulty ECU