V6 Cav - Work In progress
-
- Registered user
- Posts: 3769
- Joined: Tue May 10, 2011 7:24 pm
- Location: blackwood south wales
Re: V6 Cav - Work In progress
sound good fella
iirc gaz fitted the vectra gsi recaro's into his cav, could be worth checking his build thread
iirc gaz fitted the vectra gsi recaro's into his cav, could be worth checking his build thread
My valver brings all the boys to the yard, dam right its cammed and carbed, dam right it pops and farts, I would show you but the fuker won't start!
Re: V6 Cav - Work In progress
Yea i seen that mate but im sure its a different set up on the recaros. . . Although i assume the same principle. I will be taking a trip to u pull it on Sunday see what seats they got!
Re: V6 Cav - Work In progress
Vectra Half leather looks really good in a cav. Just depends how much fannying about you want to do to make it fit. You need a angle grinder and welder to fit Vecy stuff.
I wants to fit a red leather set up from a Astra coupe. but again too much hassel. And buy the time I'd paid someone to make it fit I might as well have paid someone to retrim in fresh leather.
I wants to fit a red leather set up from a Astra coupe. but again too much hassel. And buy the time I'd paid someone to make it fit I might as well have paid someone to retrim in fresh leather.
C30XE
Re: V6 Cav - Work In progress
Wouldn't bother with upull it they bugger all in the now unless they got more cars in this week right enough vec recaros look awsome cracking seat no fancy some cav gsi seats?
Re: V6 Cav - Work In progress
Yea id put any sport seat in but cav stuff is rare to find and in good nick. Are gsi same as turbo like? U pull it rotate every day mate. I just like a nose sometime!
Re: V6 Cav - Work In progress
vectra half leather back bench needs welded in as braket diffrent BUT if you deff want set i know where there is 3 vectra sri with near mint condtion half leathers is BUT you will need to travel to ayrshire to get them
-
- Registered user
- Posts: 3769
- Joined: Tue May 10, 2011 7:24 pm
- Location: blackwood south wales
Re: V6 Cav - Work In progress
turbo seats are the same as gsi seats just in lether iirc dude
My valver brings all the boys to the yard, dam right its cammed and carbed, dam right it pops and farts, I would show you but the fuker won't start!
Re: V6 Cav - Work In progress
if he cab get cheap cavalier gsi seats see about getting them retrime in leather just idea few places in fife prob do itgsi pie wrote:turbo seats are the same as gsi seats just in lether iirc dude
Re: V6 Cav - Work In progress
Cheers guys! Yea Steve i thought about re trim but its a very expensive trade. I hear of people paying 500 plus just to re trim two front seats. I know its a skilled job etc but i couldn't justify that as i can't just splash that kinda cash. Transcal do it in livingston but expensive.
Re: V6 Cav - Work In progress
a lad from scotvoc got his corsa seats done in leather by a place in Edinburgh, £60 per seat, looks like they done a cracking job of it aswell.
If in Doubt.......Flat out!
Re: V6 Cav - Work In progress
there few place that do it there was a thread on vxdc as well sumeone was looking to get it done
seen few place that do it for good price , or if you ask sumeone with a sweing machine see if the would sew your old leather over cloth seats worth a go or as pie said try get cloth gsi seats thats what i had in my old v6 turbo look a like they are very cumfy
infact they mibby still in it as guy ript engine out and got rid of shell sumewhere up fife way
seen few place that do it for good price , or if you ask sumeone with a sweing machine see if the would sew your old leather over cloth seats worth a go or as pie said try get cloth gsi seats thats what i had in my old v6 turbo look a like they are very cumfy
infact they mibby still in it as guy ript engine out and got rid of shell sumewhere up fife way
Re: V6 Cav - Work In progress
Really! I will need to try find out where that was!
Re: V6 Cav - Work In progress
Sri seats are the same. Just think the GSi's have lumbar surrport not sure about the Sri's
My Cesaro's aare the same style as Gsi, but no lumber surrport.
My Cesaro's aare the same style as Gsi, but no lumber surrport.
C30XE
-
- Registered user
- Posts: 3769
- Joined: Tue May 10, 2011 7:24 pm
- Location: blackwood south wales
Re: V6 Cav - Work In progress
re trims aint that much tbh dude
all depends what you want done up here its £100 for to seats in a solid colour
like all black leather etc with out the fancy colour stitching etc
all depends what you want done up here its £100 for to seats in a solid colour
like all black leather etc with out the fancy colour stitching etc
My valver brings all the boys to the yard, dam right its cammed and carbed, dam right it pops and farts, I would show you but the fuker won't start!
Re: V6 Cav - Work In progress
snap as shell was mint and had full gsi kit on itStoater85 wrote:Really! I will need to try find out where that was!
Re: V6 Cav - Work In progress
Ok so i could just re trim a pair for 100 quid. Would that generally mean you would loose the stitching lines that run up the seats or just mean you get that but basic black threading.?
Re: V6 Cav - Work In progress
If you retrim Gsi seats it'll get cold in winter with out havin the heater element
C30XE
Re: V6 Cav - Work In progress
Mate if its only around 100 quid i would re trim yours if you still had them.
Re: V6 Cav - Work In progress
Yeah mine are still here.Stoater85 wrote:Mate if its only around 100 quid i would re trim yours if you still had them.
Dave944 or Dave955 the guy with the slammed black turbo on BBS reps is busy having his seats retrimed in red leather. He said that the old lether covers off his seats will be up for grabs. so the its just a case of getting the panels need stitched in.
I'm after one bolster from him.
Let me know if you want the seats as There is someonne that is also intrested on MIG, but he keeps puttin the date back of when he wants to come for them, so not sure if he's geniune. I need rid of the them ASAP as they are taking up engine and gear box space in my garage and dont really want to pile them on top of my gf's car to make space.
C30XE
Re: V6 Cav - Work In progress
This looking proper cool fella the stance is awesome the rims suit it so well nice job
[center]
[/center]
[/center]
Re: V6 Cav - Work In progress
got the car on the rollers yesterday, 182bhp and 192 torque. Nice to see its healthy. was a good day out.
-
- Registered user
- Posts: 3769
- Joined: Tue May 10, 2011 7:24 pm
- Location: blackwood south wales
Re: V6 Cav - Work In progress
nice figues
My valver brings all the boys to the yard, dam right its cammed and carbed, dam right it pops and farts, I would show you but the fuker won't start!
Re: V6 Cav - Work In progress
Very nice figures. Bet its a quick car.
Re: V6 Cav - Work In progress
cheers guys - yes it goes well, very quick further up the range, not as great 0-60 if you know what i mean. still handy in that region though, but its in its element at the higher end.TurboDan wrote:Very nice figures. Bet its a quick car.
Re: V6 Cav - Work In progress
As a said last night mate gid figures goes well!