Page 1 of 13

V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 4:51 pm
by Stoater85
ok as it started out:

Image

Image

Image

Image

Image

Then the kit and wheels on:

Image

Image

Image

Then the suspension and exhaust:

Image

Image

Image

RIGHT, DO NOT ANYONE HAVE A GO FOR ME ATTEMPTING THIS, BUT THE CARDS WILL END UP BINNED ANYWAY SO THOUGHT I'D TRY A TEMP MEASURE BEFORE I FIND NEW CARD...

ok - now just started to paint door card fabric as they no longer match the leather interior. This was always a risk as it may screw up, and I think it will, but i have nothing to loose as the door cards looked S.H.I.T anyway!!!

before:

Image

Image

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 5:03 pm
by steven240374
Hi nice car i have seen them on wheeler dealers do it to a parcel shelf,does it not leave them feeling really hard on the fabric bit

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 5:14 pm
by Stoater85
steven240374 wrote:Hi nice car i have seen them on wheeler dealers do it to a parcel shelf,does it not leave them feeling really hard on the fabric bit
depends on the fabric, it has left this a tad tougher but it looks pretty good. I wouldn't recommend spraying fabric but for the odd wee thing its fine. I will post once its complete and tidied and touched up and let you all know how it goes.

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 5:38 pm
by steven240374
How much is your cav lowered by as it sits nice :thumb

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 6:03 pm
by Stoater85
steven240374 wrote:How much is your cav lowered by as it sits nice :thumb
60mm mate. My signature pic is about -100mm as I had the wrong springs on it but it looked good!

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 7:50 pm
by iangsi
What type of paint did you use ? special fabric paint or normal rattle can, as I need to do the back shelf in my motorsport as it has faded something rotten.

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 7:55 pm
by humbucker
its unique, as said elsewhere, the colour of the car and the turbo kit really suit it, spot on.

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 8:20 pm
by TurboSteven77
looking good mate

ps you should get windefectrors cavaliers look good with them imhpion

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 9:35 pm
by marcelboukes
nive cav, did you respray the compleet car?

marcel

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 10:34 pm
by jimmy
:cool :cool and it does look good in your signature :thumb

Re: V6 Cav - Work In progress

Posted: Sun Jan 08, 2012 10:40 pm
by gazza1701-a
That's a mighty fine Cav you have there, nice job with the door card, I was thinking of doing mine, I have some grey ones I wouldn't mind having a go at, keep us posted on how they turn out :thumb

Re: V6 Cav - Work In progress

Posted: Mon Jan 09, 2012 7:01 pm
by Stoater85
iangsi wrote:What type of paint did you use ? special fabric paint or normal rattle can, as I need to do the back shelf in my motorsport as it has faded something rotten.
I just used normal matt black mate. It works fine especially on a parcel shelve. Fabric stuff only helps retain the fabric texture but it never really works! So I just bought this stuff £1 a tin at Poundland LOL super bargain!!!

I cant get decent pics till weekend as I start work when its dark and finish when its dark!! lol

Re: V6 Cav - Work In progress

Posted: Mon Jan 09, 2012 7:03 pm
by Stoater85
marcelboukes wrote:nive cav, did you respray the compleet car?

marcel
Hi, the car had a respray but not the roof as that saved quite a few quid. It was only re-sprayed to ensure the kit matched - as you can see from the 'before' pics, there was no rust or anything although there were a couple of minor dents which got sorted during the respray.

thanks!

Re: V6 Cav - Work In progress

Posted: Thu Jan 12, 2012 11:44 am
by gsi pie
what size are the pipes on the bk box buddy?

Re: V6 Cav - Work In progress

Posted: Sat Jan 14, 2012 7:17 pm
by Stoater85
gsi pie wrote:what size are the pipes on the bk box buddy?

twin 3.5inch, outward rolled tips mate

Re: V6 Cav - Work In progress

Posted: Sat Jan 14, 2012 7:22 pm
by gsi pie
they suit it buddy :thumb

Re: V6 Cav - Work In progress

Posted: Sat Jan 14, 2012 7:24 pm
by Stoater85
gsi pie wrote:they suit it buddy :thumb
yes i put the same on my last cav, and my veccy GSI's too. I love the look of them, especially outward rolled as the little lip that it gives it makes it a little more sporty and bigger.

Re: V6 Cav - Work In progress

Posted: Sat Jan 14, 2012 7:31 pm
by TurboDan
Get some pics up of the carlton next to it, looks great.

Re: V6 Cav - Work In progress

Posted: Sat Jan 14, 2012 7:52 pm
by Stoater85
TurboDan wrote:Get some pics up of the carlton next to it, looks great.
thats the previous owner mate - i bought it off him as he decided against the project as he was after another lotus carlton. He only had this for a couple of months. He is the guy that made the lotus carlton estate - well obviously it wasnt a real lotus as it was an estate but it went round loads of shows.

Re: V6 Cav - Work In progress

Posted: Sun Jan 22, 2012 4:32 pm
by Stoater85
ok update on the doors and a wee extra mod:

before:

Image

Image

after:

Image

Image
Image




Looks really good. I would only recommend this as a temp or cheap measure as its not perfect but its surprisingly ok for a £5 mod!! 4 tins of paint from poundland and a roll of masking tape ;)




Next wee mod:

Corsa gear stick with vextra selector insert in the top:

Image

Re: V6 Cav - Work In progress

Posted: Sun Jan 22, 2012 4:37 pm
by Stoater85
some pics from todays wash and first decent pics...



Image

Image

Image

Image

Image

Image

Re: V6 Cav - Work In progress

Posted: Sun Jan 22, 2012 7:31 pm
by rustyarches
I wish mine was a saloon,looks great,good job on the door cards

Re: V6 Cav - Work In progress

Posted: Sun Jan 22, 2012 7:47 pm
by Stoater85
rustyarches wrote:I wish mine was a saloon,looks great,good job on the door cards
thanks mate yea door cards turned out well! maybe a pure fluke lol

Re: V6 Cav - Work In progress

Posted: Mon Jan 23, 2012 2:18 pm
by 5853moore
looking good fella been watching it over on vvoc.

Re: V6 Cav - Work In progress

Posted: Mon Jan 23, 2012 7:49 pm
by Stoater85
5853moore wrote:looking good fella been watching it over on vvoc.
cheers mate - its really interior now i want sorted out.

my g-max shocks are getting fitted on wednesday tho so that should stiffen things up!