Page 5 of 6
Re: Wheels Pic thread - Ive made a start
Posted: Sat Sep 15, 2012 9:46 pm
by specks
I'll text Adil to confirm how the Volvo wheels are fitted.
Re: Wheels Pic thread - Ive made a start
Posted: Sat Sep 15, 2012 10:15 pm
by specks
No spacers,adaptors,nothing just straight swap.
Re: Wheels Pic thread - Ive made a start
Posted: Mon Sep 17, 2012 2:16 pm
by Turbodave
C70, S70R or V70R and yes, 5 x 108 so not sure how he got away with using standard bolts give the Turbo is 5 x 110?
RAF Engineering?
Re: Wheels Pic thread - Ive made a start
Posted: Mon Sep 17, 2012 2:46 pm
by gsi pie
2mm is noithing really
like fitting fait wheels on a vaux
fiat......4x98
vaux .....4x100
straight on
Re: Wheels Pic thread - Ive made a start
Posted: Mon Sep 17, 2012 7:44 pm
by specks
No idea Dave but that's what his text said
Re: Wheels Pic thread - Ive made a start
Posted: Mon Sep 17, 2012 10:43 pm
by Stoater85
gsi pie wrote:2mm is noithing really
like fitting fait wheels on a vaux
fiat......4x98
vaux .....4x100
straight on
Yea. I had fiat wheels on my last cav, and my team dynamics on this cav are ford fitment! 2mm is nothing.
Re: Wheels Pic thread - Ive made a start
Posted: Tue Sep 18, 2012 8:46 am
by dave955
I'd say 2mm is a lot when there meant to fit exact. I'd personally run wobble bolts
Re: Wheels Pic thread - Ive made a start
Posted: Tue Sep 18, 2012 1:21 pm
by humbucker
Turbo #2 found itself sat on the Astra's wheels a few weeks back. 17-inch SE2's from my Mk4 Linea Rossa. Apart from the fact that both car and wheels were filthy I quite liked them. The Astra, however, looked shite on the Cav rims.
Re: Wheels Pic thread - Ive made a start
Posted: Tue Sep 18, 2012 6:28 pm
by Turbodave
gsi pie wrote:2mm is noithing really
like fitting fait wheels on a vaux
fiat......4x98
vaux .....4x100
straight on
I dunno...
The bolt hole is angled as are the bolts, so therefore when you tighten them down fully the bolts are seated in the bolt holes with equal pressure/force/whatever all the way round. If you have bolts going into a hole that's 2mm out then the force will be concentrated to one side of the bolt hole rather than equally and in this case where the Volvo's bolts are in a 108mm diameter pattern and the Cavalier is 110mm, the force of the tightened down bolts will be on the outer edges of the bolt holes rather than centred as it should...
I'm not convinced at all, especially when you consider the bolts are tightened down to 110 - 120Nm and that's a shit load of force and on a wheels with the wrong PCS, that's a shit load of force where a shitload of force isn't meant to be, bearing in mind the angled faces/bolts will also exaggerate said force so in effect when you tighten the five bolts down, they'll in effect be trying to remain on a 110mm diameter pattern where the wheel is 108mm...
It's basic engineering and it's not right!
Re: Wheels Pic thread - Ive made a start
Posted: Thu Mar 21, 2013 6:31 pm
by John Owens
Some excellent photos of some very smart cavs on this thread . Good work guys
Re: Wheels Pic thread - Ive made a start
Posted: Fri Mar 22, 2013 10:51 am
by Barney
Can anyone photoshop a set of Lenso BSX 17's or 18's onto a satin red cav please as im considering fitting some but cant picture it my head, head seen them fitted to other colour cars and they look good.
Ta..
Re: Wheels Pic thread - Ive made a start
Posted: Fri Mar 22, 2013 12:11 pm
by dave955
If your fitting bsx alloys beware you will be doing major archwork
Re: Wheels Pic thread - Ive made a start
Posted: Fri Mar 22, 2013 1:43 pm
by Cav.turbo
Re: Wheels Pic thread - Ive made a start
Posted: Sun Jun 16, 2013 7:06 pm
by gsi pie
ET 35 momo arrows 60+ plus drop
ET 35 does fit
Re: Wheels Pic thread - Ive made a start
Posted: Sun Jun 16, 2013 9:39 pm
by dave955
Looks mega on those
Re: Wheels Pic thread - Ive made a start
Posted: Mon Jun 17, 2013 4:48 pm
by John Owens
I had et 35 borbetts on my gsi when it was lowered 60mm & they scrubbed like fook ! Your lucky Si
Re: Wheels Pic thread - Ive made a start
Posted: Wed Jul 10, 2013 1:57 pm
by Sim Dhillon
Omega alloys
Re: Wheels Pic thread - Ive made a start
Posted: Fri Sep 06, 2013 2:11 am
by Sim Dhillon
Porsche
Re: Wheels Pic thread - Ive made a start
Posted: Fri Sep 06, 2013 1:24 pm
by belmont_dazz
What size are the porsche wheels? Are they the same pcd do you know?
Re: Wheels Pic thread - Ive made a start
Posted: Fri Sep 06, 2013 6:22 pm
by Gaz
porsche wheels are 5x130
Re: Wheels Pic thread - Ive made a start
Posted: Fri Sep 06, 2013 10:08 pm
by Gray16v
GSi on 16" BBS Calibra DTM Wheels
Re: Wheels Pic thread - Ive made a start
Posted: Sun Sep 22, 2013 5:29 pm
by joe cavalier sri
16 tsw stealths
Re: Wheels Pic thread - Ive made a start
Posted: Fri Dec 06, 2013 3:58 pm
by uncle_sam
An another style, german style , borbet A in 7.5j ET25, one pic of my car.
Re: Wheels Pic thread - Ive made a start
Posted: Fri Dec 06, 2013 4:00 pm
by gsi pie
ive always liked them
Re: Wheels Pic thread - Ive made a start
Posted: Fri Dec 06, 2013 4:46 pm
by planetc
OFront wheel looks like it is too close to the door. I would recommend that you check the wishbone as it is probably bent, although it could be the angle of the photo?