Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

right here's a strange one for you all

driving my white cav tonight , was giving it some love (revving lol ) and I seem to have lost my limiter now ???

I did have one last night tho

it revs straight thro 8 like its on carbs??

it runs a groupe N ecu but that's been fitted since ive had it

how are the limiters controlled on these? ECU or dizzy?

any help would be great as don't fancy my conrods goin east

ecu, mine has eds chips and it has the 8k limit.

mined use ti limit at 7.8k iirc

proper group N ecu with paper work to

so could be any ecu error /fault ya gaz?

I didn't know EDS done stuff for the XE's only LET's I thought

Cant see it being anything else. planetc will probably correct me

Yea they dont do a lot tbh, i did see a small improvement but id have been pissed if it had been the £300 eds wanted

http://www.eds-motorsport.de/shop/de/Op ... steigerung

I can't really see it being much else either, if the limit is set in the ecu then the only way it could fail is if the ecu doesn't know the engine speed, which would lead to other problems. Rather odd really?

Maybe your rev counter needle has slipped?

rev counter is fine as it idles fine

there is just no limiter lol

hold you foot flat and it just revs and don't stop the sound is really nasty lol

just went out and wipped the ecu out

and mr chip want to leave its holder ffs

can I just push the chip back in??

I don't want to fuk anything up?

thanks

yea but might be worth pulling it fully out you dont want it going in pissed.

ok

is it just the 6 screws holding it together gaz?

last thing I want it to bugger the board up

thanks

Its the plastic pin in the middle needs the centre pulling out and unclipping the pegs on the edges