should i be worried about this?
- humbucker
- Club Admin
- Posts: 9298
- Joined: Tue Aug 19, 2008 10:42 pm
- Location: Cobra Kai Dojo
- Contact:
Re: should i be worried about this?
...and if so, why?
pic is of rear passengers side rear when wheel removed.
pic is of rear passengers side rear when wheel removed.
Re: should i be worried about this?
YES for the next mot , anyway
if that crack is in the metal scrape it back clean it up and get a small amount of weld on it , try to drill a small hole at the top of the crack to keep it from travelling any further.
and the spring plate on the chassis needs looking at too, it is a favorite starting point to rot the rail out .
clean it up , check for holes , if it ok red oxide ,stonechip, underseal and for that bit of extra protection a shot of waxoyle
if that crack is in the metal scrape it back clean it up and get a small amount of weld on it , try to drill a small hole at the top of the crack to keep it from travelling any further.
and the spring plate on the chassis needs looking at too, it is a favorite starting point to rot the rail out .
clean it up , check for holes , if it ok red oxide ,stonechip, underseal and for that bit of extra protection a shot of waxoyle
now running a swedish vauxhall...
the old cav vid
http://www.youtube.com/watch?v=YYC4wHjqAhw
the new saab vid
http://www.youtube.com/watch?v=h-K5L6UDGFk
the old cav vid
http://www.youtube.com/watch?v=YYC4wHjqAhw
the new saab vid
http://www.youtube.com/watch?v=h-K5L6UDGFk
Re: should i be worried about this?
At least youve caught it before it gets out of hand.
- Envoy CDX
- Club Admin
- Posts: 9681
- Joined: Sun Sep 23, 2007 3:51 pm
- Location: Jarrow, Newcastle Upon Tyne
Re: should i be worried about this?
Don't worry about it, but certainly get it seen too.
- humbucker
- Club Admin
- Posts: 9298
- Joined: Tue Aug 19, 2008 10:42 pm
- Location: Cobra Kai Dojo
- Contact:
Re: should i be worried about this?
is the plate replacable? is it worth getting a new part and welding it in or from looking at it is it possible to simply weld up whats there?
Re: should i be worried about this?
yes. Get it seen too. It killed off my Astra Mk2.
If you don't sort it, it will crack further, rust and might even rot the chassis, as mine did.
If you don't sort it, it will crack further, rust and might even rot the chassis, as mine did.
I am.... THE LAW!
- humbucker
- Club Admin
- Posts: 9298
- Joined: Tue Aug 19, 2008 10:42 pm
- Location: Cobra Kai Dojo
- Contact:
Re: should i be worried about this?
ok then. so i'll get the crack heading upwards seen to, and as for the spring plate, just to confirm, you're saying this is a replaceable part and should be removed and rewelded? i just need to be sure i know what work i need to ask to get done by whoever welds it, and also which parts i should get. as much detailed advice as is necessary would be awesome.
thanks
thanks
- Cavyman_130
- Registered user
- Posts: 1253
- Joined: Mon Oct 01, 2007 8:24 am
- Location: Dunfermline, Scotland
Re: should i be worried about this?
just sand it back, put a weld on it and sealed it back up, job done
- humbucker
- Club Admin
- Posts: 9298
- Joined: Tue Aug 19, 2008 10:42 pm
- Location: Cobra Kai Dojo
- Contact:
Re: should i be worried about this?
you mean the spring plate?Cavyman_130 wrote:just sand it back, put a weld on it and sealed it back up, job done
- Cavyman_130
- Registered user
- Posts: 1253
- Joined: Mon Oct 01, 2007 8:24 am
- Location: Dunfermline, Scotland
Re: should i be worried about this?
ah never noticed the spring plate, be better off just replacing that really mate.
- humbucker
- Club Admin
- Posts: 9298
- Joined: Tue Aug 19, 2008 10:42 pm
- Location: Cobra Kai Dojo
- Contact:
Re: should i be worried about this?
i should check the other side too... is the plate welded on to the chassis or is it just sandwiched inbetween the chassis and the spring? does it just slot between the two or is it actually attached to the car?
- Cavyman_130
- Registered user
- Posts: 1253
- Joined: Mon Oct 01, 2007 8:24 am
- Location: Dunfermline, Scotland
Re: should i be worried about this?
not 100% on this mate but I would presume it would be attached to the car in someway