headlamp wipers and jets from gsi/turbo into other cav

[humbucker]

hi all. there might be an answer to this on here somewhere but i'm struggling to find it... does anyone know what bits i will need from a donor cav gsi/turbo if i want to take the headlamp wipers/washers and fit them to my cdx? i'm interested to know which bits i will need and how best to fit them?

thanks in advance for your help

[Envoy CDX]

Need:

Wipers
Motors
Wiring
Washerfluid bottle (or you will be forever filling it up)
Tubing for fluid
And relays and a books of words to work out the wiring

[Colorado]

it is quite involved

[Envoy CDX]

Getting everything lined up on the panel would be my concern, wiring is a doddle if you just take the time to revise your plans and work around unforeseen problems

[humbucker]

Getting everything lined up on the panel would be my concern, wiring is a doddle if you just take the time to revise your plans and work around unforeseen problems

i dont follow. which panel do you mean, the panel under the headlamp? which problems do you forsee?!

[Colorado]

You will need to get it lined up to get the holes drilled in. ! hole for the wipers and another for the washers. You can use double sided trim tape for the rubber bits the wipers rest on. I reckon that will be the trickiest bit

[Envoy CDX]

Getting everything lined up on the panel would be my concern, wiring is a doddle if you just take the time to revise your plans and work around unforeseen problems

i dont follow. which panel do you mean, the panel under the headlamp? which problems do you forsee?!

Yes, the panel you'll have to drill through to put the motors in and wiper arms on.
I'd make a template from the car you take them off personally.