Mk3 Cavalier Owners Club | Vauxhall Cavalier Dot Com

Guys,

I have to rebuild the exhaust system on the Cav and as a mate has access to ramps we are going to do it in his workshop but he has asked I get the Clamps and Gaskets and have no idea how many I will need.

I am presuming there is a gasket between the 2 parts of the manifold, one pre cat and one after then one at backbox??

May as well replace all the hangers at the same time so what do I need? and best place to get them at reasonable cost as Halfrauds is bloody useless.

Cheers

Do you have a photo of the hangers you'll need? I might be able to help out following the replacement of all of mine with polybushes.

As for clamps, do you know what size you'll need? 54mm rings a bell. Let me know, got loads here.

humbucker wrote:As for clamps, do you know what size you'll need? 54mm rings a bell. Let me know, got loads here.

Cheers, need them for Saturday morning so probably a motorfactors job.

Poly bushed my back box one as kept slipping off its mount.

Well that was simples

Called my local Motorbitz and they can get full set excluding manifold to head gasket for £14 by tomorrow so ordered that, should do for time being and hope it fits the new straight centre pipe

Result. Is that gaskets + clamps?

Cavalier342 wrote:Result. Is that gaskets + clamps?

Yes mate, everything bar the manifold gasket