Mk3 z20let

Post queries regarding your Mk3 Cavalier's fuel system (including ECUs) and exhaust here
Post Reply
sm4rt1e
Posts: 1
Joined: Mon Feb 13, 2017 5:21 pm

Mk3 z20let

Post by sm4rt1e »

Hi peeps lots of head ache Have put a z2olet in a mk3 and we are struggling with wiring can anyone help?be of assistance with any links or things would be most appreciated :?:
User avatar
Robsey
Club Admin
Posts: 10569
Joined: Fri Dec 12, 2008 1:42 pm
Location: East Manchester

Re: Mk3 z20let

Post by Robsey »

We had an identical request a week or so ago, but the original poster did not respond.
If it helps, this is the post that I sent him.

Assuming we are on about a non-CAN Astra-G, rather than the more complicated CAN Vectra-C...
I have not wired / fitted one myself, but there is a thread by TurboDan who has done this exact modification.

From memory, it doesn't contain a lot of the technical information.
More like a work in progress thread.

Here it is -

viewtopic.php?f=21&t=2934&start=0

I have spent a while this morning trawling through my laptop, and it appears that I have looked at the Z-let wiring for someone before.

I have all the wiring diagrams for the ecu plus diagrams for any modules that are wired directly to the ecu if that helps.

I have the ecu in j-peg and pdf format,
All other modules in pdf format,
And an ecu in excel spread sheet at present.

Is that what you are looking for?

Due to the amount of information I have pulled together this morning, it would probably be best if you email me or pm me with an email address.
User avatar
Robsey
Club Admin
Posts: 10569
Joined: Fri Dec 12, 2008 1:42 pm
Location: East Manchester

Re: Mk3 z20let

Post by Robsey »

PM received.

I will email some info later this evening.

Will probably take a few emails.
Ha ha.


Aaand - Email sent.
Let me know if you need any more information.
Post Reply